anyone on here who would be willing to draw me some plans for a box to hold a pair of EU-700s or should i just contact eD? i got all the measurements i have to work with, i just need the plans for a vented box tuned to 30-35 hz. i dont know how to build tuned-vented boxes, so for anyone wondering thats why im asking. thanks guys

[~Magick_Man~]

that is the box jeremyg recommended, i have it in my car with 125 watts going to each eu and it puts out bass you would never expect from a pair of 6.5" speakers.

~Magick_Man~

Originally Posted by ~Magick_Man~

that is the box jeremyg recommended, i have it in my car with 125 watts going to each eu and it puts out bass you would never expect from a pair of 6.5" speakers.

~Magick_Man~

yea, i was looking at that. but i was trying to see if i could go with something that was closer to my measurements. with the baby stuff in the trunk, that box is gonna be sticking out too far. unless it would be alright to run it standing up with the subs and vent facing the rear deck? what do you think, its in the rear of an Accord

anyone know if there are programs designed to be used to build speaker enclosures? maybe something like CAD? closest thing i know of for enclosure related stuff is WinISD

[JeremyG]

i used autoCAD to do blueprints...post up your measurments and someone might have something that will work or be willing to draw it up

Jeremy...that box you drew up for the pair of 700s, how would it sound if i had it standing on end with the subs and port facing up towards the rear deck?

if anyone is willing to make me some plans, the dimensions are as follows:
31" wide, 8" deep and 12" tall

if a angled box could be done without a ton of extra work, the dimensions are:
31" wide, 9" btm depth, 6-1/2 top depth, 12" tall. the straight side would be where the subs would be mounted, angled side against rear seat back