[Wolvatron]

Originally Posted by moonlistener

Did you happen to keep track of how much eDead sheet product you used on your Doors?

I think both doors took just a little over 30 sq ft.

Rough render of the box. It will get carpeted.

[alexlindeman]

Boooooo......

I wanted to see ported.

L O L Sad face....

[Inferno333]

I wish I had a warm place to work on the car.

I really want to get the Nine.2, Nine.2x, and Nine.1 rocking together.

[mattcossel29]

Nice! I cant wait to see this when its done! I miss having a decent audio setup

[joeybutts]

Originally Posted by alexlindeman

Boooooo......

I wanted to see ported.

L O L Sad face....

My sentiments.....

[Wolvatron]

Goals of last night:

Run power wire from battery to trunk
Run remote turn on wire from HU to trunk
Run the above 2 wires plus speaker wire down driver side of the car.

Here's where I need to run the power wire through.




And my all time favorite part ever of an install - crawling underneath the interior.






I had to take the stupid battery out.


I made a small cut on both the outside of the grommet and inside of it. Let's see if we can get that wire through..


I SEE THE HEAD!


YAYAAYYYAAAYAYAA!!!


Engine bay buttoned back up. I wrapped the end of the wire with tape and tucked it neatly off to the side.


Panels came off surprisingly easy.


Dear Toyota: Thank you for making my life easier.


And right about here is where the camera died. I couldn't just stop working and wait, so I worked while it charged for awhile. Basically I ran the remote wire to the HU and bundled ran all the wires down that nice channel Toyota gave me, then all the way to the trunk.













That's it for now!

[Wolvatron]

Just so you guys know, I'm waiting for stuff to come in before I proceed.

Although, I suppose I could build that box...

[joeybutts]

Done yet?

[alexlindeman]

I missed the last update.

That little channel is pretty nice for holding the wires huh? Its almost like it was meant for that.

[Kast78]

Awesome build. Cant wait to see those 8s in there!

[CFAIST]

I wish my Focus had A channel like that for my 1/0. Would have made my My life MUCH easier. Looking good man!

[joeybutts]

Where we at Matt?

[spl152db]

its probably finished, he's probably rocking out and forgot pictures and is never going to respond to this thread again!

[joeybutts]

Bastard! My projects may take forever but at least I post it up till the end!

[Wolvatron]

Sorry guys.

I'm waiting on some stuff to get delivered (batt. terminals, fuse holder, rca's, blah blah), but I have no excuse for why I haven't built the box yet. I'll get going on this again this week, I promise. I also need to deaden the trunk with the remaining edead that I have.

[alexlindeman]

Should have had one of these for working under the dash.

http://dash-surfer.com/

[Wolvatron]

Built the box tonight.

Thank you Joey and Pat for the motivation.

Pics coming tomorrow.

Tomorrow night will be sanding and carpeting the box.

[joeybutts]

That a way brother! I can't wait to experience this next year!

[Wolvatron]

I drink a lot of Monster.


An awesome picture when Alex came in to use the air real quick.


Let's cut this beast!




All the pieces.


Top on.


Side on.


Other side on.


Brace in.


Bottom on.


Make sure to run glue on all the seams to seal the box!


Back on.


And then the logo was hammered in place.


And there you have it! The logo turned out to be sticking out just a bit too much, so I sanded it down about .25 inches. Should look pretty neato when it's carpeted, which will be tonight.

[joeybutts]

Awesome brotha! How will this be oriented in the trunk?